Approvals
HMS Makina is approved for all required special processes from major primes such as Airbus, Bombardier and Boeing
Airbus Approvals
| Specification | Title |
|---|---|
| 80-T-30-4010 | Machining of Metallic Components |
| 80-T-30-6918 | Finishing of Metal Components Deburring, Cleaning |
| 80-T-30-9910 | Drilling, Reaming and Countersinking of Rivet and Screw Holes |
| 80-T-35-0014 | Cleaning with Organic Solvents Cold Cleaning Agents |
| 80-T-35-0104 | Pickling of Stainless, Austenitic Steel |
| 80-T-35-0106 | Pickling of Titanium and Titanium Alloys - Acid - |
| 80-T-35-1101 | Chromating of Aluminum and Aluminum Alloy |
| 80-T-35-1200 | Passivation of Corrosion-resistant Austenitic Steel |
| 80-T-35-5002 | Coating with Two-component Primer EP-based |
| 80-T-35-5030 | Coating with TwoThree-component Water-based Primer |
| 80-T-35-5106 | Coating with PUR-based Top Coat |
| 80-T-35-5130 | Coating with TwoThree-component Water-based Top Coat |
| 80-T-35-5212 | Coating with Anti-slip Paint |
| 80-T-35-9120 | Coating with Paints and Varnishes, General |
| 80-T-35-9124 | Repair of Paint Coatings on Metallic and Non-Metallic Surfaces |
| 80-T-39-0132 | Marking with Indelible Ink |
| 80-T-39-0230 | Treatment of Damage on Components Made of Aluminium Alloy |
| AIPS 01-02-003 | Preparation of Holes in Metallic Materials for Fastening |
| AIPS 02-01-002 | Sulphuric Acid Anodising of Aluminium Alloys |
| AIPS 02-01-003 | Tartaric Sulphuric Anodising of Aluminium Alloys for Corrosion Protection and Paint Pre-treatment |
| AIPS 02-05-001 | Chemical Conversion Coating |
| AIPS 02-05-005 | Passivation of Corrosion Resistant Steel |
| AIPS 05-02-003 | Application of External Paint Systems |
| AIPS 05-02-009 | Application of Structural Paints |
| AIPS 05-02-011 | Rework of Paints on Metallic and Non-metallic Structural Parts |
| AIPS 07-01-006 | Electrical Bonding |
| AITM 6-1001 | Penetrant Testing |
| AITM 6-6004 | For Inspection Processes Determination of Electrical Conductivity of Aluminium Alloys by Eddy Current Method |
| 80-T-35-2000 | DC Sulphuric Acid Anodizing without Sealing |
| 80-T-35-1200 | Passivation of Corrosion-resistant Austenitic Steel |
| 80-T-35-1201 | Passivation of Martensitic, Ferritic Corrosion–Resistant Steel |
| 80-T-35-5254 | Coating with PUR–based Varnish, Abrasion–resistant (two–component polyurethane–based varnishes (PUR)) |
| 80-T-35-0194 | Pickling of Stainless Martensitic Steels |
| 80-T-35-0014 | Cleaning with Organic Solvents |
| 80-T-35-0090 | Rinsing |
| 80-T-36-3300 | Dehydrogenation of Steels |
| 80-T-35-0200 | Abrasive Blasting - Cleaning - |
| 80-T-35-0205 | Shot Peening |
| A2PS 138-043 | APPLICATION OF FLUID RESISTANT PRIMER |
| A2PS 138-044 | APPLICATION OF FLUID RESISTANT (FR) ENAMELS AND DECORATIVE TOPCOATS |
| A2PS 138-055 | ACCELERATED CURING OF ORGANIC COATINGS |
| A2PS 144-005 | IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES (Intrusive Methods Only) |
| A2PS 151-001 | INSTALLATION OF CONVENTIONAL RIVETS |
| A2PS 157-028 | PRESSURE AND ENVIRONMENTAL SEALING |
| A2PS 160-010 | CHROMIC ACID ANODIZING |
| A2PS 160-020 | CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| A2PS 160-036 | ELECTROLYTIC POLISHING |
| A2PS 160-040 | CONDUCTIVE CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYS |
| A2PS 160-045 | CHROME FREE ACID ANODIZING OF ALUMINUM ALLOYS |
| A2PS 168-013 | HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS |
| A2PS 175-004 | RETENTION OF BEARING BY PRESS SWAGING |
| A2PS 175-005 | INSTALLATION OF INTERFERENCE FIT BUSHINGS |
| A2PS 176-002 | FLUORESCENT PENETRANT INSPECTION |
| A2PS 180-001 | ALKALINE CLEANING |
| A2PS 180-011 | CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS |
| A2PS 180-015 | PASSIVATION OF CORROSION RESISTANT STEEL |
| A2PS 180-030 | ALKALINE ETCHING OF ALUMINUM ALLOYS |
| A2PS 180-031 | CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS |
| A2PS 180-032 | ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS |
| CAPTIVE LABORATORY | CAPTIVE LABORATORY |
| A2ERD-GEN-018-1A | INSTRUMENTAL TECHNIQUES OF CHEMICAL ANALYSIS PERFORMED SUCH AS GFAA, FLAME AA, ICP, DCP. |
| A2ERD-GEN-018-1B | WET CHEMISTRY, TREATMENT OF SOLUTIONS AND WATERS PERFORMED BY CLASSICAL NONINSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION |
| A2ERD-GEN-018-5A | CORROSION TESTING |
| A2ERD-GEN-018-5E | EVALUATION OF PAINTS |
Boeing Approvals
| Specification | Title |
|---|---|
| Quality System | Boeing approved QMS as defined in D1-4426 Processor Requirements Sec 6.16.3 |
| AMS-QQ-P-416 |
Plating- Cadmium (Electrodeposited) |
| ASTM-B-117 |
Salt Spray Testing |
| BAC 5019 |
Chromic Acid Anodizing - Class 1 and 3 |
| BAC 5019 |
Chromic Acid Anodizing - Class 5 |
| BAC 5423 |
Penetrant Inspection |
| BAC 5424 |
Magnetic Particle Inspection |
| BAC 5617 |
Heat Treat of Alloy Steels |
| BAC 5619 |
Heat Treat of Corrosion Resistant Steel |
| BAC 5632 |
Boric Acid - Sulfuric Acid Anodizing Class 1 |
| BAC 5632 |
Boric Acid - Sulfuric Acid Anodizing Class 5 |
| BAC 5637 |
Zinc - Nickel Alloy Plating |
| BAC 5701 |
Cadmium Plating Types I - II |
| BAC 5719 |
Chemical Conversion Coatings for Aluminum (Immersion Application Only) |
| BAC 5730 |
Shot Peening |
| BAC 5753 |
Cleaning - Descaling of Titanium - Method II |
| BSS 7039 | Liquid Penetrant Inspection |
| BSS 7040 |
Magnetic Particle Inspection |
| Chemical Testing |
Process Solution Control |
| MIL-A-8625 |
Chromic Acid Anodizing of Alum. - Type I |
| MIL-A-8625 |
Anodize Aluminum Type Ic Boric Sulfuric Anodize |
| MIL-A-8625 | Sulfuric Acid Anodize Type II |
| DTL-5541 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys (Immersion Application Only) |
Bombardier Approvals
| Specification | Title |
|---|---|
| BAPS 138-043 | Application of Fluid Resistant (FR) Primer |
| BAPS 138-044 | Application of Fluid Resistant (FR) Enamels & Decorative Topcoat |
| BAPS 138-055 | Accelerated Curing of Organic Coatings |
| BAPS 145-002 | Electrical Bonding of Aircraft |
| BAPS 151-001 | Installation of Conventional Rivets |
| BAPS 157-028 | Pressure & Environmental Sealing |
| BAPS 160-010 | Chromic Acid Anodizing |
| BAPS 160-020 | Chemical Conversion Treatment for Aluminum Alloys |
| BAPS 160-040 | Chemical Conversion Coating Treatment for Aluminum Alloys |
| BAPS 168-013 | Hardness & Conductivity Testing of Metals |
| BAPS 175-004 | Installation & Retention of Self Aligning Groove Bearings by Roller or Anvil Swaging |
| BAPS 175-005 | Installation of Interference Fit Bushings |
| BAPS 176-002 | Fluorescent Penetrant Inspection |
| BAPS 180-001 | Alkaline Cleaning |
| BAPS 180-011 | Cleaning & Deoxidizing Copper and Copper Alloys |
| BAPS 180-015 | Passivation of Corrosion Steels |
| BAPS 180-030 | Alkaline Etching for Aluminium Alloys |
| BAPS 180-031 | Cleaning & Deoxidizing Corrosion and Heat Resistant Alloys and Titanium Alloys |
| BAPS 180-032 | Acid Cleaning & Deoxidizing Aluminium Alloys |
| PPS 20.07 | Conductivity Testing |
| PPS 20.08 | Hardness Testing |
| PPS 32.09 | Application of Dry Film Lubricants |
| PPS 34.03 | Application of Polyurethane Enamel |
| PPS 34.08 | Epoxy Primer |
| BAERD GEN 018 | Engineering Requirements for Laboratories |
| BAPS 160-045 | Chrome Free Acid Anodizing of Aluminium Alloys |
| BAPS 144-005 | Marking with Chemical Etch |
Diehl Aviation Approvals
| Specification | Title |
|---|---|
| AIPS 05-02-009 | Application of Paint |
| AIPS 02-01-003 | Tartaric Sulphuric Anodising of Aluminium Alloys for Corrosion Protection and Paint Pre-treatment |
| AIPS 02-01-002 | Sulphuric Acid Anodising of Aluminium Alloys |
| AIPS 02-05-005 | Passivation |
| FA 10-006 | Adhesive Bonding of Non-structural Connnection |
| FA 11-001 | Processing of Adhesive Tapes |
| FA 15-015 | Installation of Rivets |
GKN Approvals
| Specification | Title |
|---|---|
| AMS 2402 | Zinc Plating |
| WAPS 09-02 | Cleaning of Metal Surfaces |
| WAPS 24-01 | Interference Fits for Componet Assembly |
| WAPS 25-02 | Penetrant Flaw Detection |
| WAPS 25-04 | Hardness and Conductivity Inspection |
| WAPS 25-07 | Approval of NDT Personnel |
| WAPS 26-01 | Application of Cold Curing Epoxy Primers and Fillers |
| WAPS 26-05 | Cold Curing Epoxide Type Finish Resistant To Ester Lubricants |
| WAPS 26-08 | Application of High Heat Resisting Enamel |
| WAPS 28-03 | Cadmium Plating |
| WAPS 31-01 | Protection of Metallic and Non-metallic Items |
| WAPS 36-01 | Wet Assembly and Sealing |
| WAPS 41-01 | Conversion Coating |
| WAPS 41-04 | Passivation of Steels |
| WAPS 41-05 | Chromic Acid Anodising |
| NAS 4006 | Aluminum Coatings on Fasteners |
Industrial Specifications
| Specification | Title |
|---|---|
| AMS 2700 | Passivation of Corrosion Resistant Steel |
| AMS 2402 | Zinc Plating |
| AMS-QQ-P-416 | Cadmium Plating of Steel |
| MIL-A-8625 | Anodising of Aluminium Alloys |
| MIL-C-5541 | Chemical Conversion Coating |
| AMS-QQ-P-35 | Passivation of Corrosion Resistant Steel |
| ASTM B-633 | Zinc Plating |
| ASTM E1417 | Penetrant Inspection |
| NAS 4006 | Aluminum Coating on Fasteners |
| AMS 2417 | Cadmium Plating of Steel |
